Inakustik Cables

NF-2404 Air Pure Silver (RCA)

The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. Our cables of the REFERENCE AIR series have already caused a sensation in the world of high-end connections: "It was the best cable that ever acted between amp and speakers!" (AUDIO 02-2020 | LS-2404 AIR PURE SILVER). With the NF-2404 AIR Pure Silver, the analog device connection of the AIR family is now also available as a pure silver cable. Dimension, structure and arrangement of the conductors correspond to the respective copper versions. As with the LS-4004 AIR Pure Silver, LS-2404 AIR Pure Silver and LS-1204 Pure Silver, the signal conductors have been optimized. The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. The approach sounds relatively banal: Physical losses must be minimized in order to transmit the original music signal as unchanged and neutral as possible. And AIR technology comes closer than ever to lossless transmission. It leads to significantly better sound reproduction, which is not only subjectively audible, but also objectively measurable.

 

A superconductor that does not resist the current would be perfect. However, the superconducting properties of the material require low temperatures of at least minus seventy degrees. Silver is currently the most conductive material under real conditions. At 61.35 S/m (Siemens per meter), its conductivity is about six percent better than that of copper. However, the precious metal is about 100 times more expensive. WHY NOT JUST INCREASE THE COPPER CROSS SECTION?

 

The insulation or dielectric of the AIR cables is almost perfect thanks to the air insulation and hardly influences the sound any more. The construction, dimensions and arrangement of the conductors are optimized and fully exploit what is physically feasible. In order to set another sonic highlight on this basis of audiophile perfection, the developers at in-akustik have now focused on the conductor material of the cables. Copper of the appropriate purity is a very good conductor.

 

To learn more about this product, click here

NF-2404 Air Pure Silver (XLR)

The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. Our cables of the REFERENCE AIR series have already caused a sensation in the world of high-end connections: "It was the best cable that ever acted between amp and speakers!" (AUDIO 02-2020 | LS-2404 AIR PURE SILVER). With the NF-2404 AIR Pure Silver, the analog device connection of the AIR family is now also available as a pure silver cable. Dimension, structure and arrangement of the conductors correspond to the respective copper versions.

 

As with the LS-4004 AIR Pure Silver, LS-2404 AIR Pure Silver and LS-1204 Pure Silver, the signal conductors have been optimized. The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. The approach sounds relatively banal: Physical losses must be minimized in order to transmit the original music signal as unchanged and neutral as possible.

And AIR technology comes closer than ever to lossless transmission. It leads to significantly better sound reproduction, which is not only subjectively audible, but also objectively measurable. The insulation or dielectric of the AIR cables is almost perfect thanks to the air insulation and hardly influences the sound any more. The construction, dimensions and arrangement of the conductors are optimized and fully exploit what is physically feasible. In order to set another sonic highlight on this basis of audiophile perfection, the developers at in-akustik have now focused on the conductor material of the cables. Copper of the appropriate purity is a very good conductor.

 

To learn more about this product, click here

Digital-2404 Air Pure Silver (XLR)

The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. Our cables of the REFERENCE AIR series have already caused a sensation in the world of high-end connections: "It was the best cable that ever acted between amp and speakers!" (AUDIO 02-2020 | LS-1204 AIR PURE SILVER). With the NF-1204 AIR Pure Silver, the analog device connection of the AIR family is now also available as a pure silver cable. Dimension, structure and arrangement of the conductors correspond to the respective copper versions. As with the LS-4004 AIR Pure Silver, LS-1204 AIR Pure Silver and LS-1204 Pure Silver, the signal conductors have been optimized. The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry.

The approach sounds relatively banal: Physical losses must be minimized in order to transmit the original music signal as unchanged and neutral as possible. And AIR technology comes closer than ever to lossless transmission. It leads to significantly better sound reproduction, which is not only subjectively audible, but also objectively measurable. The insulation or dielectric of the AIR cables is almost perfect thanks to the air insulation and hardly influences the sound any more.

The construction, dimensions and arrangement of the conductors are optimized and fully exploit what is physically feasible. In order to set another sonic highlight on this basis of audiophile perfection, the developers at in-akustik have now focused on the conductor material of the cables. Copper of the appropriate purity is a very good conductor. A superconductor that does not resist the current would be perfect.

 

To learn more about this product, click here

Digital-2404 Air Pure Silver (RCA)

The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. Our cables of the REFERENCE AIR series have already caused a sensation in the world of high-end connections: "It was the best cable that ever acted between amp and speakers!" (AUDIO 02-2020 | LS-1204 AIR PURE SILVER). With the NF-1204 AIR Pure Silver, the analog device connection of the AIR family is now also available as a pure silver cable. Dimension, structure and arrangement of the conductors correspond to the respective copper versions. As with the LS-4004 AIR Pure Silver, LS-1204 AIR Pure Silver and LS-1204 Pure Silver, the signal conductors have been optimized.

The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. The approach sounds relatively banal: Physical losses must be minimized in order to transmit the original music signal as unchanged and neutral as possible. And AIR technology comes closer than ever to lossless transmission. It leads to significantly better sound reproduction, which is not only subjectively audible, but also objectively measurable.

 

The insulation or dielectric of the AIR cables is almost perfect thanks to the air insulation and hardly influences the sound any more. The construction, dimensions and arrangement of the conductors are optimized and fully exploit what is physically feasible. In order to set another sonic highlight on this basis of audiophile perfection, the developers at in-akustik have now focused on the conductor material of the cables. Copper of the appropriate purity is a very good conductor. A superconductor that does not resist the current would be perfect. However, the superconducting properties of the material require low temperatures of at least minus seventy degrees.

 

To learn more about this product, click here

High Speed USB

The Reference USB 2.0 cable has been designed especially for low-loss HD audio streaming. The data lines consist of fine, separately lacquer-insulated copper wires (high speed conductors) The Reference USB 2.0 cable has been designed especially for low-loss HD audio streaming. The data lines consist of fine, separately lacquer-insulated copper wires (high speed conductors). In combination with the high-quality materials, they reduce the jitter effects that particularly affect the sound quality when streaming audio data. Sensitive data is additionally protected by 4-fold shielding. Extremely generously proportioned cables for the power supply of e.g. external hard drives minimize voltage fluctuations. Even with particularly long cables, they ensure that the peripheral devices function perfectly and therefore data is transferred with low error rates. The product is rounded off by the high-quality Reference USB plug and the precise manufacturing.

FEATURES

• High speed data cable

• Special data cable insulation

• 4-layer shield

• PE-Network Jacket

• Reference metal plug

• Very low jitter

 

To learn more about this product, click here

LS-4004 Air Pure Silver (SW)

The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. e AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. The approach sounds relatively banal: Physical losses must be minimized in order to transmit the original music signal as unchanged and neutral as possible. And AIR technology comes closer than ever to lossless transmission. It leads to significantly better sound reproduction, which is not only subjectively audible, but also objectively measurable. The insulation or dielectric of the AIR cables is almost perfect thanks to the air insulation and hardly influences the sound any more.

The construction, dimensions and arrangement of the conductors are optimized and fully exploit what is physically feasible. In order to set another sonic highlight on this basis of audiophile perfection, the developers at in-akustik have now focused on the conductor material of the cables. Copper of the appropriate purity is a very good conductor. A superconductor that does not resist the current would be perfect. However, the superconducting properties of the material require low temperatures of at least minus seventy degrees.

Silver is currently the most conductive material under real conditions. At 61.35 S/m (Siemens per meter), its conductivity is about six percent better than that of copper. However, the precious metal is about 100 times more expensive. WHY NOT JUST INCREASE THE COPPER CROSS SECTION?

 

To learn more about this product, click here

LS-2404 Air Pure Silver (SW)

✓The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. The AIR technology is a milestone in our more than 40-year company history and is causing a worldwide sensation in the hi-fi industry. The approach sounds relatively banal: Physical losses must be minimized in order to transmit the original music signal as unchanged and neutral as possible. And AIR technology comes closer than ever to lossless transmission. It leads to significantly better sound reproduction, which is not only subjectively audible, but also objectively measurable. The insulation or dielectric of the AIR cables is almost perfect thanks to the air insulation and hardly influences the sound any more.

The construction, dimensions and arrangement of the conductors are optimized and fully exploit what is physically feasible. In order to set another sonic highlight on this basis of audiophile perfection, the developers at in-akustik have now focused on the conductor material of the cables. Copper of the appropriate purity is a very good conductor. A superconductor that does not resist the current would be perfect. However, the superconducting properties of the material require low temperatures of at least minus seventy degrees.

Silver is currently the most conductive material under real conditions. At 61.35 S/m (Siemens per meter), its conductivity is about six percent better than that of copper. However, the precious metal is about 100 times more expensive. WHY NOT JUST INCREASE THE COPPER CROSS SECTION?

 

To learn more about this product, click here

AC-4004 Power Cable

A HiFi system basically reproduces nothing else than modulated household electricity. So this should arrive at the device as constantly as possible. In this case, the mains connection cable is of essential importance. Music is always very dynamic and when it is being played it produces an extremely variable power consumption at integrated amplifiers, power amplifiers or powered loudspeakers. The rapidly changing increase and decrease of power causes extreme current peaks, which generate strong magnetic fields as well as radiated interference and lead to power losses at cable and contact resistances. However, even these current peaks must be fed to the components quickly and without loss. Any inhibited current flow, no matter where it occurs in the hi-fi/High End chain, has a negative influence on the sound.

As is known from physics, electrical conductors not only have a resistance but also capacitive and inductive properties that disturb the flow of energy from the socket to the hi-fi device. Therefore the power line from the wall socket and from the power strip or power station to the hi-fi/High End system plays a very important role. For these reasons, we have developed the AC-4004 AIR mains cables. They are based on the legendary Air technology, which we have already used, for example, for the speaker cables LS-4004 AIR or LS-2404-AIR and which have caused a sensation in the High End scene worldwide.

The individual conductors are held at fixed distances by means of the specially developed clips and isolated from each other by air. The "air dielectric" ensures low capacities between the conductors. The multicore design compensates for the interference and magnetic fields caused by the current peaks. This considerably minimises the line inductance. In addition, the skin effect is greatly reduced by the large number of individual wires. This is caused by the steep current flanks that accompany high frequencies. By distributing the current over many wires, the actual usable conductor cross-section is increased, in addition to a general increase in overall cross-section.

 

To learn more about this product, click here